View LC503TWN1-50P-A1_1263523.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Cree(R) 5-mm Round LED
Model # LC503TWN-50P-A Data Sheet
50-degree, 5-mm round LED lamp in white color with water-transparent lens and stopper
Applications
* * * * Advertising Signs Indicators LCD Back Light Illuminations
Absolute Maximum Ratings (TA = 25C)
Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature
Note
Symbol IF IFP VR PD Topr Tstg Tsol
Absolute Maximum Rating 25 100 5 100 -40 ~ +95 -40 ~ +100
Unit mA mA V mW C C
Max. 260C for 3 sec. max. (3 mm from the base of the epoxy bulb)
Note: Pulse width 0.1 msec, duty 1/10.
Typical Electrical & Optical Characteristics (TA = 25C)
Characteristics Forward Voltage Forward Voltage Reverse Current Luminous Intensity Chromaticity Coordinates 50% Power Angle Symbol VF VF IR IV x y 21/2H-H Condition IF = 20 mA IF = 1.0 A VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA deg Unit V V A mcd 1520 3000 0.31 0.32 50 1.7 Minimum Typical 3.4 Maximum 4.0 2.5 100
D-CT074.000 Data Sheet: CL
Subject to change without notice. www.cree.com/ledlamps
Standard Bins for LC503TWN-50P-A (IF = 20 mA)
Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x,y) bins shown. Orders for LC503TWN1-50P-A1 may be filled with any or all bins contained as below. All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 20 mA.
A1
A2
B1
B2
c X or above
Luminous Intensity (IV)
4180 mcd W 3000 mcd V 2130 mcd U 1520 mcd Chromaticity Coordinates (x,y)
Rank Chromaticity x Coordinates y Rank Chromaticity x Coordinates y
0.307 0.337 0.245 0.229 0.264 0.267
A1
0.280 0.248 0.264 0.220 0.264 0.267 0.283 0.305
A2
0.296 0.276 0.280 0.248 0.283 0.305 0.307 0.337
B1
0.313 0.297 0.296 0.276
B2
0.330 0.360 0.330 0.318 0.313 0.297 0.330 0.360 0.361 0.385
c
0.356 0.351 0.330 0.318
Important Notes 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Pb content <1000 ppm. 3. Tolerance of measurement of luminous intensity is 15%. 4. Tolerance of measurement of the color coordinates is 0.01. 5. Tolerance of measurement of VF is 0.05 V. 6. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 7. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 8. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT074.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
CIE Chromaticity Diagram
CIE Chromaticity Diagram
0.90
CIE
520
0.80
530 510 540 550 560
0.70
0.60
490
0.50
570 580 590
Y
0.40
c B2
600 610 620 630
0.30
480
A1
B1 A2
0.20
470
0.10
460
0.00 0.00
0.10
0.20
0.30
X
0.40
0.50
0.60
0.70
0.80
4/5
Format #: COTCO-D-074 REV.4
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
3
CLD-CT074.000
Document No. SPE/LC503TWN1-50P-A1 Rev. No. 04
Graphs Graphs
If (mA)
Vr(V) -50 -40 -30 -20 -10 0 0.0 -10.0 -20.0 -30.0 -40.0
100.0 80.0 60.0 40.0 20.0
0.0 3.0 3.4 3.8 4.2 4.6 5.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE.
Vf(V)
Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE.
-50.0
Half Power
WL=150nm
5.0 4.0 3.0 2.0 1.0 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0
I (RELATIVE LUMINOUS INTENSITY) 100% 75% 50% 25% 0% 400 500 600 700 800
FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT
FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH.
50 40 30 20 10 0
IF(mA)
50% Power Angle :
0
50
Ie(%)
100%
80%
60%
40%
Ta( C) 0.0 20.0 40.0 60.0 80.0 100.0
-90 -60 -30 0 30 60 90
20%
0%
FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=105 C)
FIG.6 FAR FIELD PATTERN
Items Prepared by Checked by Approved by FCN#
Signatures
LiuZM HuangJD David
Date
2007-04-26 2007-04-26 2007-04-26 Rev. No 02 03 04 Date
Revision History
Change Description 2006-04-17 Cancel VF bin. 2006-06-29 Change FIG.5 2007-04-26 Change tolerance of CIE(x,y) from +/-0.015 to +/-0.01
FCN20070432
Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
4
CLD-CT074.000
5/5
Format #: COTCO-D-074 REV.4
Mechanical Dimensions
All dimensions are in mm. Tolerance is 0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max.
Document No. SPE/LC503TWN1-50P-A1 Rev. No. 04
Dimension Drawing
te maximum ating 25 100 5 100 ~ +95 ~ +100
Unit mA mA V mW
C C
60C for 3 sec Max.
RoHS Compliance
Notes the base of the epoxy bulb)
tics
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the ( threshold5limits) permitted for such substances, or are used in an exempted application, in accordance with EU DirecTa = 2 ) tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006.
C
Condition
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Min. ---
Typ. 3.4
Max. 4.0
Unit V
IF = 20mA
rights reserved. The in this 2.5 V IF = Copyright (c) 2007 Cree, Inc. All1.7of Cree, Inc. information --- document is subject to change without notice. Cree and the 1.0 Cree logo are registered trademarks
5
CLD-CT074.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Standard/Custom
0: Standard C: Custom
VF
0: Full forward voltage distribution 1~9, A~Z . . . : special request *
Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV
1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . :special request *
Packing type Product P/N
0: Standard = Bulk pack 1~9, A~Z . . . : special request *
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number LC503TWN1-50P-A1-00001 LC503TWN1-50P-A1-00002 Description 5mm Round 50 White, FULL RANK, Bulk Pack 5mm Round 50 White, A1, A2, B1, B2, Bulk Pack
* Please contact your Cree representative about the availability of non-standard kits.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
CLD-CT074.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps

▲Up To Search▲

Price & Availability of LC503TWN1-50P-A1

	To Download LC503TWN1-50P-A1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .